Application of VEICHI AC80C in Punch Press Machine

프로젝트 개요

Overview

60%-70% of metal materials are the sheet metals, and most of them are finished by stamping, which is widely used in various fields of national economy.

Punch press machine is a stamping type press. In national production, compared with traditional mechanical processing, the stamping process could save material and energy, and thus has a high efficiency. Besides, there are not high technical requirements for operators to apply different molds to make products, which are beyond the capacity of mechanical processing.

As the driving part of punch press control, there is also punch press specialized inverter which is derived from general products, and it plays a decisive role in the output stability, accuracy, reliability and load ability of high-speed punch press machine.    

Process Requirements

The requirements of frequency energy-saving transformation for equipments:

(1) Steady speed rising while starting without any mechanical impact to protect the mechanical parts of punch press machine and prolong the maintenance time;

(2) Adjustable speed in accordance with product requirements to guarantee the product quality, reduce scrap rate and increase product profit;

(3) Automatic alarm and stop while punch press motor overload running, to protect molds and punch head, which saves the production cost, improves punch automation, promotes production efficiency and reduces working intensity for enterprises..

Solutions of VEICHI Products

VEICHI AC80C series inverter could solve the following problems:

1. The dead point problem of crank connecting rod mechanism

Usually, the punch press machine adopts crank connecting rod mechanism to transform rotary motion into reciprocating motion, but there are dead points (both "upper dead points" and "lower dead points") in the mechanism. Therefore, the change of the load is not uniform and shows periodic fluctuation in the whole motion cycle.

2. Sudden load change problem during stamping

Basically there are at least three operation points with sudden change load in punch press machine,  (a) cross over the upper dead point; (b) cross over the lower dead point; (c) contact workpiece while stamping;

3. Low speed operation problem while parts of the workpiece stamping

There is mechanical hand reclaiming and feeding in automatic continuous punch press machine, and thus it is better to operate more rapidly. However, in some cases, the good low-speed performance is required for punch press machine.

4. Inch movement problem in the adjustment of molds 

It needs the inch movement in the adjustment of molds, which means that the clutch pulls in and off constantly, so that the motor will be loading and unloading frequently. At this time, there must be a good current suppression function in inverter. 

Conclusion

The punch press system with VEICHI AC80C inverter could achieve steady and reliable operation, and gain high economic benefits for customers. And VEICHI overall solution is highly praised by customers through the actual production test. The specific advantages are as below:

1. Real current VC control technology with perfect low-frequency torque;

2. Fast and stable function of speed tracking restart;

3. Current limiting function to protect inverter and motors;

4. Perfect voltage suppression function.